Tools and Calendar 103
Insert the microSD Card
1. Use the fingertip cutout at the bottom of the back cover to lift and remove it.
2. Locate the microSD card slot, position the microSD card facing up and then gently
slide it into place until it is fully inserted and locked.
Note: Be sure to use only recommended microSD cards (32MB–16GB). Using non-
recommended microSD cards could cause data loss and damage your phone.
Remove the microSD Card
1. Use the fingertip cutout at the bottom of the back cover to lift and remove it.
2. Locate the microSD card slot and push in to release the microSD card.
3. Pull the microSD card out of the microSD card slot.
Note: You can easily damage the microSD card and its adapter by improper operation. Please
be careful when inserting, removing, or handling them.
DO NOT remove a microSD card while files are being accessed or transferred. Doing so
can result in loss or damage of data.
Make sure your battery is fully charged before using the microSD card. Your data may
become damaged or unusable if the battery runs out while using the microSD card.
microSD Adapter
The microSD adapter allows you to use microSD cards in other SD-compatible devices, like
computers, cameras, and printers. Before using the microSD card with an SD-compatible
device, you will need to insert the microSD card into the microSD adapter.
To insert the microSD card into the microSD adapter:
► With the label side of the microSD card facing up, insert the card into a microSD
adapter, and gently slide the card until it is fully inserted.
To remove the microSD card from the microSD adapter:
► Hold the front edge of the microSD card, and gently pull it out to remove it from the
adapter.
Write Protection
The microSD adapter has a built-in Write Protection lock to prevent accidental overwriting or
removal of your data when the microSD card and adapter are inserted in another device.
To Next Page
Loading...
