Phone 34
3. If multiple numbers are saved in the Contact entry, touch Contact Details then the
number you wish to dial.
Speed Dialing
You can store up to 98 numbers in your phone’s speed dial memory. Dial speed dial entries
using one key touch for locations 2–9 or two key touches for locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
► Touch and hold the appropriate key for approximately two seconds. The display confirms
that you have dialed the number when it shows “Connecting...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Touch the first digit.
2. Touch and hold the second digit for approximately two seconds. The display confirms
that you have dialed the number when it shows “Connecting...”.
Note: Speed dialing is not available when you are roaming; when you are roaming off the
Nationwide Sprint Network, you must always dial using eleven digits (1 + area code +
number).
Plus (+) Code Dialing
When placing international calls, Plus Code Dialing automatically enters the international access
code for your location (for example, 011 for international calls made from the U.S.).
1. Press or touch and hold until you see a “+” on the display screen.
2. Dial the country code and phone number, and then touch Talk. The phone
automatically prepends the access code for international dialing, followed by the
country code and phone number.
Caller ID
Caller ID allows people to identify a caller before answering the phone by displaying the number
of the incoming call. If you do not want your number displayed when you make a call, follow
these steps.
1. Press and then touch .
2. Enter a phone number.
3. Touch Talk.
To permanently block your number, call Sprint Customer Service.
To Next Page
Loading...
