162
INSTALLER SETTING
ENGLISH
Data logging
This function is to check the operation and error history.
• In the installer setting list, select Data logging category, and press [OK] button to move to the
detail screen.
NOTE
Error history lookup range: 50
Error history information
Item: date, time, mode (including Off), set temperature, incoming temperature, outgoing
temperature, room temperature, Hot water operation / stop, Hot water set
temperature, Hot water temperature, Outdoor unit On / Off, Error code
Number of Display: Within 50
- Save criteria ν
ν Error occurred, released ON / OFF of outdoor unit operation.
To Next Page
Loading...
Need help?
General