Power and Ground Check
Warning
Ground wire should be connected.
(※ Use a ground wire and screws purchased from the LG Electronics service center.)
If the ground wire is not connected, there is a potential danger of electric shock caused by the current leakage.
Connecting Power Plug
Do not use with other appli-
ances at the same AC 220 V
outlet.
Do not use the power from a
transformer from 110 V to 220
V.
Never connect to the power
outlet for a factory (380 V).
220 V power connection
and grounding method
Make sure to plug the washer
into a ground wired 220 V
outlet.
This washer runs exclusively at
220 V.
Other Grounding Method
Connect the ground wire to a
ground copper plate and bury it
more than 75 cm in the ground
with moisture.
Place to avoid to ground
Do not connect the ground to
a telephone wire or light rods.
This may be dangerous during
lightning.
Ground
wire
Ground
wire
AC 220 V
Ground
copper plate
leakage breaker
Ground
wire
Adapter
If the AC current outlet does
not have a ground terminal,
then separated grounding must
be done.
If a power extension cord has
to be used, use one with a
ground, circuit breaker, and
over 15 A.
If the grounding methods de-
scribed above are not possible,
connect a separate ‘leakage
breaker’ to the power outlet.
Connect to the exclusive
ground wired power outlet.
To prevent a possible explo-
sion, do not connect to a gas
pipe.
Do not connect to a water tap
for grounding.
To Next Page
Loading...
