PRODUCT INSTALLATION
ENGLISH
11
Inputting power source
Use a power source of 24 V~ conforming to local and national codes.
CAUTION
• When connecting the power source confirm the location of the power source connector
and connect it firmly.
• When selecting a transformer you must select a product with safety isolation that meets
IEC61558-2-6 and NEC Class 2 regulations. Also, when selecting an appropriate trans-
former, each installed module, accessory and volume of total energy consumption of the
field devices must be considered.
• When power source must be supplied after completely connecting the product.
!
To Next Page
Loading...
