The Beep on/off function can be set by pressing
and holding the Option2 and Rinse button
This display shows:
a) the estimated time remaining in the
cycle when operating.
EST. T ime remaining
Beep on/off
In case of abormal operation, error
indications are displayed.
(
)
¥ see troubleshooting
Tub Clean course can be set by
pressing and holding Rinse button
simultaneously.
Tub Clean is a special cycle to
clean the inside of the washer.
Tub Clean
Select a water temperature based
on the type of load you are
washing.
By pressing the Rinse button, the
Rinse type can be selected.
Rinse, Temp. Button
simultaneouly.
Use this option to prevent unwanted
use of the washer. Press and hold
Spin button button for 3 seconds
to lock/unlock control.
When Child lock is set, CHILD LOCK
lights and all buttons are disabled
except the Power button. You can
lock the washer while it is operating.
Child Lock
To Next Page
Loading...
Need help?
General
