35
Check if there is some water on the base ?
Some part have broken.(ex. Tub,
dispenser, inlet hose, circulation
hose, steam generator, pump,
drain hose)
Replace the broken part.
YES
Check if there is some water on the base ?
YES
Assemble the safety switch.
Reconnect or repair the connector.
Or replace the harness.
NO
NO
NO
Replace the safety switch.
NO
Water Leakage (AE)
Is the connector connected correctly to the main PCB
and the safety switch?
Or is the harness right?
Is safety switch assembled correctly to
the base?
When you press and hold the styrofoam
in the safety switch, is AE displayed?
YES
YES
To Next Page
Loading...
Need help?
General
