WM2277 WASHER PAGE 20 of 84 TRAINING MANUAL
CONTROL PANEL
The control panel is located on the front of the washer. All options are available
from the control panel. (See larger drawing, page 20.)
Cycle Knob
The large knob that selects the cycle. (See chart, p. 21.)
ON/OFF button
Pressing this button turns the machine ON or OFF.
START/PAUSE
Press this button to start the cycle or to pause the
washer when a cycle is in progress. The door may not
unlock in every case. (See page 8.)
Custom Program
Set the controls for a special cycle that you use often,
then press and hold this button to set that cycle. Then
use this button every time you wish to use your special,
custom cycle.
Delay Wash
Set the cycle controls and then press this button up to
12 times to delay the start of the cycle for up to 12
hours.
Wash / Rinse
Selects one of the wash and rinse temperature
combinations available.
Spin Speed
Selects one of the available spin speeds between 0 (no
spin) and 1,150 rpm.
Soil Level
Adjusts the default washing time by ±16 minutes based
on soil level.
Beeper
Adjusts the warning tone from OFF to LOUD in 5 steps.
Option Buttons
See the chart on the next page.
To Next Page
Loading...
