WM2277 WASHER PAGE 23 of 84 TRAINING MANUAL
PROGRAM CHART
This chart shows the components and their times of operation in the various
wash cycles. The time estimates shown here are for the basic cycles before the
fuzzy logic adjustments are made. Variations may be made in almost any cycle
by making adjustments on the control panel. Some options are locked out on
some cycles; for example, you cannot select EXTRA HOT WASH on a
DELICATE CYCLE or EXTRA HIGH SPIN on PERMANENT PRESS.
BEFORE PERFORMING SERVICE
• Be careful to avoid electric shock when disconnecting parts for
troubleshooting.
• Most terminals in the washer have 120 V
AC
or V
DC
on them, sometimes
even when the washer is off.
• Spinning the drum by hand, even when the washer is OFF and unplugged,
can cause the motor to generate voltage and backfeed it into the controls.
To Next Page
Loading...
