TRAINING MANUAL WM3001H*A
WM3001H*A Page 19 Washer
INSTALLATION (Pedestal, new style)
For 27” Pedestals
(Washer, Dryer, and Combo)
Remove the pedestal, installation hardware,
and instructions from the shipping
container.
(The style may vary among models.)
The pedestal kit includes:
1 drawer divider
1 wrench
4 retainers (dryer only)
18 screws (8 for dryer)
Level the pedestal on a solid, flat, level
floor. Lock down the rear adjusters, but
leave the front ones free for now.
Prepare the dryer for mounting. Retract all
four feet and lock down all four adjusters
on the dryer.
Note which holes are for the washer and
which are for the dryer. If you are stacking
the appliances, the washer should be on
the bottom.
To Next Page
Loading...
