COMBO
WM3677 COMBO Page 20 of 68 TRAINING MANUAL
ERROR CODES
• If you press START/PAUSE when an error code is displayed, the error
code will disappear and the COMBO will go into PAUSE status.
(Exception: PE)
• In a case of PE, tE, or dE, if the error is not resolved within 20 seconds,
the COMBO will power OFF.
• In the case of any other error code, if the error is not resolved within
4 minutes, the COMBO will power OFF.
• In the case of FE, the COMBO will not power off.
continued on next page
To Next Page
Loading...
