COMBO
WM3677 COMBO Page 49 of 68 TRAINING MANUAL
TUB REMOVAL AND REPAIR, continued.
18. Remove two bolts from the end
on the spider of the drum. Then
remove the screw on the
outside of the drum. Squeeze
the sides of the baffle slightly to
release the positioning tabs.
19. Repairing or replacing the roller
jet (baffle) requires removing
the drum.
Remove the three screws that
secure the inner part. Lift it out
and remove the six glass roller
balls.
The roller balls help turn the
clothes over and the baffle fills
up with water as the drum
rotates, allowing it to shower
that water out as it continues
to rotate.
20. As always, reassembly is
basically the reverse of these
steps.
To Next Page
Loading...
