A-17200-101 Flow Module
Appendix A.
Specifications
Controls: Controlled from LI-7550 via Accessory Cable or via 7200-101 Control
Panel.
Flow Rate Settings: 10-18 SLPM (standard liters per minute) setpoint mode or con-
stant blower drive mode.
Blower Pressure: 3.5 kPa minimum at 100% blower drive at 101.3 kPa and 300 K
ambient.
Accessory Link: UART on RS-485 cable.
Power Requirements:
50 W Maximum
Typical <15 W @ 25 °C, 15 liters/min. at 0.75 kPa vacuum
10.5 - 30 VDC
Operating Conditions:
-20 °C to +50 °C
IEC IP55 specified
Designed for outdoor installation
Size: 13.75" × 12.5” × 5.5” (35 cm × 30 cm × 15 cm) (not including mounting
hardware).
Weight: 13.7 lbs. (6.2 kg).
To Next Page
Loading...
