Section 1.
Overview of the 7200-101 Flow Module
The 7200-101 is a high performance flow module designed for use with the LI-
7200/RS enclosed CO
2
/H
2
O Analyzer, or other closed path analyzers. The 7200-101
attaches to the LI-7550 Analyzer Interface Unit of the LI-7200/RS to provide an
integrated flow solution; flow can be controlled through software, or manually via
the 7200-101 control panel. The 7200-101 provides a constant flow of 10-18 SLPM,
in increments of 0.1 SLPM, and requires only about 13W power during normal
operation.
What’s What
If you have just taken delivery of your 7200-101, check the packing list to verify
that you have received everything that was ordered and that you have also received
the following items:
l Mounting Kit – (part number 9979-022). This kit contains all of the hardware
needed to mount the 7200-101 Flow Module to a tripod or other mounting
post.
l Spare Parts Kit - (part number 9972-049). This kit contains replacement parts
for your 7200-101. Among other items, the spares kit contains tubing and the
power and accessory cables. As you become familiar with the Flow Module you
will learn which items to keep close at hand and which items can be stored
away. The spares kit includes these commonly used items:
Description Quantity Part Number
Tygon Tubing, ¾” O.D.; 16.4' (5 meters) length 1 222-10384
Hose Barb, 3/8” NPT 1 300-11179
Hose Barb, 1/4” NPT 1 300-11180
1-17200-101 Flow Module
To Next Page
Loading...