Lifasa MASTER control Var - Configuration Settings; Setup Menu and Plug&Play

5�- CONFIGURATION
The various conguration parameters of the unit can be consulted and edited in the unit setup
menu.
The unit always keeps the capacitors disconnected (except in the Plug&Play function).
This status is identied by the symbol in the unit status area of the display (Figure 12).
To access the setup menu, press and hold the key (> 3 s).
The Password screen appears on the display.
The password to be entered is a combination of
keys: .
It is unique and cannot be congured.
If it is not entered correctly, the unit returns to the
previous measurement screen.
If it is entered correctly and capacitors are
connected, the disconnection screen appears.
Disconnection screen: used for the unit to
automatically disconnect all the stages before
entering into conguration.
While in this screen, the unit does not respond to
the keys.
The unit automatically exits this screen, and this
can take a certain amount of time.
71
Instruction Manual
Controller MASTER control VAR FAST