YOGA RESISTANCE BANDS
FROM OUR RECOVERY + FITNESS COLLECTION
20 FlexStride User Manual Lifepro
PRODUCT
SPECIFICATIONS
MADE IN CHINA
UNIT SPECS
Size: 22.7” × 18.5” × 12.9”
Net Weight: 26.5 lbs.
Max User Weight: 110 lbs. (per pedal)
Decibel Rating: <75 dB
Battery Required: 1 AAA (included)
FLEXSTRIDE
PEDAL EXERCISER
RECOVERY + FITNESS
TROUBLESHOOTING GUIDE
Quickly troubleshoot simple issues you might experience using the table below. Please contact us for
additional assistance at: support@lifeprofitness.com, or (732) 456-6063.
ISSUE COMPUTER MONITOR DOES NOT WORK
CAUSE Battery is installed incorrectly.
SOLUTION Check to see if the battery is installed in the correct direction.
CAUSE Battery is dead.
SOLUTION Replace dead battery with one new AAA battery.
ISSUE THE PEDALS CAME LOOSE WHEN USING THE FLEXSTRIDE
CAUSE This can happen if the pedals were not properly tightened during assembly.
SOLUTION Stop using the FlexStride immediately and tighten the nuts securing the pedals.
ISSUE THERE IS A NOISE WHILE PEDALING
CAUSE The nuts attaching the pedals to the pedal mounts are not tight enough.
SOLUTION
Use the included wrench to tighten the nuts securing the pedals to the pedal arms
as tightly as you can.
CAUSE The nuts attaching the pedal arms to the FlexStride frame are loose.
SOLUTION
Each pedal arm is attached to the frame with two nuts. Use the included wrench to
tighten all the nuts. Be careful not to over-tighten.
ISSUE THE PEDALS WON’T STAY TIGHTENED OR ARE STRIPPED
CAUSE
Using the FlexStride with loose pedals will eventually damage the threads on the
pedal arms. If caught early, tightening the nuts will solve the problem. If the threads
are too damaged, the pedal won’t stay tightened even after tightening the nuts.
SOLUTION If the pedals are stripped, please contact us for assistance.
Yoga resistance bands are now available from the Lifepro website. The set
of three (3) comes with easy, medium, and hard bands and a convenient
carrying bag.
To Next Page
Loading...
