EasyManuals Logo

LifeSize Express 220 User Manual

LifeSize Express 220
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
LifeSize Express 200 Installation Guide 5
You can also disable SSH and web access on the system by configuring preferences in the
user interface. By default, Telnet access is disabled. For more information, refer to the
LifeSize Video Communications Systems Administrator Guide.
Network Bandwidth
Poor audio and video quality may result from insufficient bandwidth on your network.
LifeSize recommends that your network be capable of at least 1 Mb/s (incoming and
outgoing) for a high definition video call. During video calls with lower bandwidths, LifeSize
systems automatically select the best resolution that can be achieved with the available
bandwidth.
Domain Name Service Server
If you intend to use domain addresses for placing calls you must configure a Domain Name
Service (DNS) server, or use a Dynamic Host Configuration Protocol (DHCP) server that
automatically sets a DNS server.
Initial Configuration
During the installation process, your LifeSize system prompts you to configure it for the first
time. LifeSize recommends that you gather all the necessary information prior to installation.
The following sections provide guidelines for collecting and a means of recording this data.
You may need to consult your network administrator for network settings and system
identification information.
Note: The initial configuration screens also appear when you perform a system reset. For
more information, refer to “Restoring Default Settings” in the LifeSize Video
Communications Systems Administrator Guide.
Language
Select the language to display in the user interface. The default is English.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LifeSize Express 220 and is the answer not in the manual?

LifeSize Express 220 Specifications

General IconGeneral
Video codecsH.261, H.263, H.263+, H.264, H.239, BFCP
Maximum frame rate30 fps
Supported video modes1080p, 720p
Supported graphics resolutions1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
PTZ controlYes
ITU-supported standardsH.323
Security algorithmsHTTPS, SSH
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)15 - 85 %
HDMI ports quantity3
DVI-I ports quantity1
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Voice codecsG.711, G.722, G.722.1
Current2.5 A
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth187.5 mm
Width288 mm
Height41.3 mm
Weight1290 g

Related product manuals