Need help?Do you have a question about the Lighthouse Worldwide Solutions ApexR5 and is the answer not in the manual?
General| Light Source | Laser Diode |
|---|---|
| Data Storage | 3, 000 records |
| Channels | 6 |
| Particle Size Channels | 0.5, 1.0, 5.0, 10.0 µm |
| Display | 5.7 inch Color Touch Screen |
| Communication | Ethernet, USB |
| Battery | Rechargeable Li-ion battery |
| Power Supply | 100-240 VAC, 50-60 Hz |
| Operating Temperature | 10° to 40°C (50° to 104°F) |
| Operating Humidity | 20% to 95% non-condensing |
| Measurement Range | 0 to 1, 000, 000 particles/ft³ |
General safety precautions and warnings for operating the particle counter.
Information on LASER safety, classification, and potential hazards.
Guidelines for preventing damage from electrostatic discharge (ESD).
Technical specifications for various ApexRemote models, including size, flow rate, and power.
Steps for installing software and connecting the SmartPort cable for instrument setup.
Details the function of DIP switches for configuring the ApexRemote Serial model.
How to establish communication and power for ApexRemote using PoE.
Procedure and recommendation for annual instrument calibration.
Procedure to determine if the ApexRemote can complete zero counts successfully.
Steps for troubleshooting and diagnosing issues if the instrument fails tests.
Information on configuring the instrument parameters using the MODBUS protocol.
How to modify instrument parameters like Location, Sample Time, and Hold Time.
Description of registers used for configuring sensor-related settings.
Registers for enabling or disabling alarms for particle data channels.
Instructions on enabling or disabling alarms for individual particle channels.
Registers used to configure the alarm threshold values for particle channels.
Procedure for setting specific alarm threshold values for each channel.
Description of registers used for storing and retrieving particle count data.
To Next Page
