24
2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Overview
REDMIKE Share: Initial Set-up
1. Ensure the 705iR is ON. The red
LED on the power switch will glow.
2. Turn on the REDMIKE Share
by sliding the switch to the top
position.
3. Grip the barrel in the center
section. Avoid covering the
infrared emitters just below the
microphone grille. This could
interrupt signal transmission.
4. While speaking in a normal voice,
increase the CH B VOLUME level
on your 705iR until your voice is
barely audible.
REMEMBER: This equipment
is designed to supplement
and distribute the user’s voice
so they are able to speak in a
conversational tone. Having the
volume set too high will result in
feedback and listener fatigue.
To Next Page
Loading...
