Lightspeed flexcat - Page 10

10
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
STUDENT GROUP SPEAKER CONTROLS
AND CONNECTIONS
CONT’D
Audio Out
Audio Out Vol
Charge
16V/0.3A
Audio Out
Audio Out Vol
Charge
16V/0.3A
8. USB AUDIO OUTPUT: this USB
connection acts only as an audio
output, sending the signal out to
an external device.
9. AUDIO OUTPUT: sends the
audio signal from the tabletop
speaker to an external device
such as an Assistive Listening
transmitter (ALD) or recording
device.
10. AUDIO OUTPUT VOLUME
CONTROL: adjusts the level of
the 3.5mm audio output.
11. DC CHARGING/POWER
INPUT: to charge optional
group speaker #5-6, plug the
charging cable from the base
station into this jack.
8
9
10