Lightspeed flexcat - Remote Control Functions and Indicators

13
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REMOTE CONTROL FUNCTIONS AND
INDICATORS
1. GROUP SPEAKER SELECTION
(1-6): press to select a specific
speaker. The button turns green
when addressing that group, red
when monitoring (listening only).
2. ALL MODE: press this button
to address the whole class (all
group speakers simultaneously).
3. MICROPHONE MUTE
(MONITOR): press this button
to mute the microphone and
monitor the different groups.
4. EARPIECE VOLUME: these
volume controls turn up and
down the earpiece volume of
the teacher headset, allowing
you to hear the student groups
at the appropriate volume level.
5. CHARGING INDICATOR:
This LED turns RED when
charging and GREEN when fully
recharged.
6. LOW BATTERY INDICATOR:
This LED turns RED when battery
is low.
7. BATTERY COMPARTMENT:
remove screw and open to
replace rechargeable battery
pack
Vol
Vol
Mute
6
5
1
All
3
2
4
1
2
3
4
5
6
7