Lightspeed Flexmike - MULTIMIKE FRONT PANEL CONTROLS & INDICATORS; FRONT PANEL OVERVIEW

7
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
FRONT PANEL CONTROLS & INDICATORS
AUDIO INMICROPHONE TONE
POWER
MIN
1
MAX MIN MAX TREBLE BASS
2
1. POWER LIGHT: This light will turn blue when power is on.
2. POWER BUTTON: Press and hold this push button to turn the system power on or
o.
3. MICROPHONE VOLUME CONTROL: Controls the volume level of the microphones.
4. AUDIO IN VOLUME CONTROL: Controls the volume level of the audio source
connected to the audio input on back of the Multimike.
5. TONE CONTROL: Adjusts the audio tone adding more bass or treble for a more
rich or more crisp tone.
6. MIC 1: Microphone link and registration indicators.
a. Solid green indicates an audio link has been established.
b. Flashing amber indicates registration is in process.
MIC 2: Multimike systems do not use MIC 2 status lights.
7. SYSTEM ID LABEL: On bottom of unit (not shown) to identify it with registered
components.
5
1
2
4
2
3
6
2
7