10 Zulu User Guide
Using a Bluetooth device
Note: Different manufacturers use different interfaces and names for the functions
described here. See your Bluetooth device documentation for details as needed.
Turning on and off Bluetooth mode
To turn on Bluetooth mode:
With Zulu turned on, press and hold Zulu’s Bluetooth button until you hear a long,
high-pitched tone and the Bluetooth indicator LED flashes three quick blue pulses.
To turn off Bluetooth mode:
Press and hold Zulu’s Bluetooth button for about 5 seconds—until you hear a long,
high-pitched tone and the Bluetooth indicator LED flashes two long red pulses.
Connecting a Bluetooth device for the first time
Before you can connect a Bluetooth device to Zulu for the first time, you must pair it
with Zulu. Use the steps below.
To pair a Bluetooth device with Zulu:
1. Make sure Zulu’s Bluetooth mode is turned fully off. You should not see blue or
red flashes from the Bluetooth LED, only green flashes from Zulu’s power LED.
See “Turning on and off Bluetooth mode,” above.
2. Once Bluetooth mode is off, press and hold the Bluetooth button for about
5 seconds, until the Bluetooth LED flashes alternating red and blue. This puts
Zulu in pairing mode.
ZuluUG_online.book Page 10 Thursday, December 27, 2007 9:50 PM
To Next Page
