2. Product Overview UMX-TPS-TX100 series – User's Manual 17
Rear View - UMX-TPS-TX100 series
UMX-TPS-TX120
UMX-TPS-TX130
1
12V DC input
Connection section or see all the available Powering Options.
2
RS-232
connector
systems, or third-party device control. Pin assignment can be found in the RS-232
Connector section.
3
GPIO
assignment can be found in the section.
4
Ethernet
party control system can use this port to control the device.
5
TPS OUT
(PoE)
TM
signal transmission. Maximum CATx
cable distances can be found in the Maximum Extension Distances section.
6
Status LEDs
section.
7
IR IN and
OUT
receiver (IR IN) and transmitter (IR OUT) connection. Pin assignments can be
found in the IR Connector section.
8
Audio2 input 5-pole Phoenix connector for balanced analog audio input. Pin assignment can
be found in the Analog Stereo Audio (Phoenix) section.
9
DVI-I input
the section.
2
7
4 5 6
1
2 3
7
9
4
5 6
1
UMX-TPS-TX140 / UMX-TPS-TX140-Plus
UMX-TPS-TX140K
2 3
7
8 9
4
5 6
1
1
12V DC input
Connection section or see all the available Powering Options.
2
RS-232
connector
systems, or third-party device control. Pin assignment can be found in the RS-232
Connector section.
3
GPIO
assignment can be found in the section.
4
Ethernet
party control system can use this port to control the device.
5
TPS OUT
(PoE)
TM
signal transmission. Maximum CATx
cable distances can be found in the Maximum Extension Distances section.
6
Status LEDs
section.
7
IR IN and
OUT
receiver (IR IN) and transmitter (IR OUT) connection. Pin assignments can be
found in the IR Connector section.
8
Audio2 input 5-pole Phoenix connector for balanced analog audio input. Pin assignment can
be found in the Analog Stereo Audio (Phoenix) section.
9
DVI-I input
the section.
2 3
7
8 9
4
5 6
1
To Next Page
Loading...
