Limitorque WTR Series - Page 6

Figures / Tables
WTR Installation & Maintenance Manual 330-15000 • Revision A • August
Figures
Figure 2.1 – WTR gearbox 2-2
Figure 2.2 – WTR nameplates 2-2
Figure 4.1 – WTR Splined Adapter removal 4-2
Figure 4.2 – Worm gear quadrant adjusted to contact with mechanical
stops to set mechanical stop screw position 4-6
Figure 6.1 – WTR with SGA parts breakdown (3 through 150) 6-1, 6-2
Figure 6.2 – WTR with SGA parts breakdown (430 through 575) 6-3, 6-4
Tables
Table 3.1 – Unit weights 3-1
Table 4.1 – Splined Adapter custom bore and keyway sizes 4-3
Table 4.2 – WTR mounting base tap sizes (3 through 150) 4-4
Table 4.3 – WTR mounting base tap sizes (430 through 575) 4-5
Table 5.1 – Alternate Factory Lubricants 5-1
Table 5.2 – Lubricant Quantities 5-2
VI