WTR Series
Table of Contents
WTR Installation & Maintenance Manual 330-15000 • Revision A • August
Table of Contents
1 Introduction 1-1
1.1 Purpose 1-1
1.2 User Safety 1-1
2 Product Capabilities and Features 2-1
2.1 Initial Inspection and Storage Instructions 2-1
2.2 Product Identification 2-2
2.3 Inspection and Recording 2-2
2.4 Storage Procedure 2-3
3 Unit Weights 3-1
4 Installation Instructions 4-1
4.1 Safety Precautions 4-1
4.2 Safety Practices 4-1
4.3 Prepare Actuator 4-2
4.4 Installing WTR-3 through 150 4-4
4.5 Installing WTR-430 through 575 4-5
4.5.1 Two-Piece Drive Sleeve 4-5
4.5.2 One-Piece Drive Sleeve 4-5
4.6 Setting the Mechanical Stops on the WTR 4-6
5 Maintenance 5-1
5.1 Lubrication 5-1
5.1.1 Lubrication Inspection 5-1
5.1.2 Factory Lubricant 5-1
5.2 Minimum Lubricant Qualities Required 5-2
5.3 Disassemble and Reassemble 5-2
5.3.1 Disassemble WTR-3 through 150 5-3
5.3.2 Reassemble WTR-3 through 150 5-3
5.3.3 Disassemble SGA for WTR-15 through 150 5-3
5.3.4 Reassemble SGA for WTR-15 through 150 5-3
5.3.5 Disassemble WTR-430 through 575 5-4
5.3.5.1 Disassemble SGA 5-4
5.3.5.2 Disassemble WTR 5-4
5.3.6 Reassemble WTR-430 through 575 5-4
6 Parts Breakdown 6-1
7 How to Order Parts 7-1
V
To Next Page
Loading...
