Lifting Column LC3 IC | 6
Recommendations
•
Please follow the important LC3 IC mounting guidelines�
•
LC3 IC is for use in both push and pull applications, cable outlet from smallest profile (top)�
See top and bottom plate dimensions� The Lifting Column can be mounted upside down�
•
It is recommend to make a functional test of the application with all accessories connected before
putting it into operation
•
Intended for indoor use only
•
Not intended for use in harsh environments like e�g� pool environment, marine environment and
agriculture buildings with ammonia vapors
•
Do not place the column in very dusty environments, since this effects the sliders
•
Listen for unusual sounds and watch out for uneven running during operation� Stop the Lifting
column immediately if anything unusual is observed�
To Next Page
Loading...