33
336 804 3001.0704
6
1
336/30
P
!
3
335/27
2
1
Reversing the direction of travel
- Release the accelerator pedal (6).
- Shift the directional control lever (1) to the opposite
direction of travel.
- Depressing the accelerator pedal (6) will accelerate the
truck in the new direction.
The directional control lever can be shifted directly to the
opposite direction of travel. Without releasing the accelerator
pedal, the truck will be braked to a standstill electrically and
accelerated in the desired direction.
Single-pedal model Operation
Malfunctions during operation
ATTENTION
If one of the following warning lights in the
combined instrument illuminates during
operation, stop the truck and remedy the fault without
delay.
(Refer to: Malfunctions, causes, remedy)
- Brake shoe wear indicator* (1)
- Motor temperature warning light (2)
- Hydraulic oil temperature warning light* (3)
* Option
Travel in the forward direction
- Push the directional control lever (1) forward.
- Depress the accelerator pedal (6) smoothly. Truck speed
depends on how far the pedal is depressed.
Travel in the reverse direction
- Pull the directional control lever (1) back.
- Depress the accelerator pedal (6). The reversing speed of
the truck depends on how far the pedal is depressed.
NOTE
Depending on the version, the directional control lever
(1) is mounted in the armrest in front of the lift and tilt
control levers or under the steering wheel.
To Next Page
Loading...
