4. DAILY PRE-RIDE INSPECTION
WARNING
You must inspect your ATV each time before riding to ensure it is
in proper working order. If proper inspection is not done, severe
injury or death could result.
Use the following checklist to verify your machine is improper
working order each time you ride.
Item/Inspection procedure
1. Tire- check condition and pressures.
2. Fuel tank- fill the fuel tank to its proper lever.
3. All brakes- check operation, adjustment and fluid level.
4. Throttle- check for free operation and closing.
5. (Headlight) / Taillight / Brakelight- check operation of all
indicator lights and switches.
6. Engine stop switch / Tether switch - check for proper function.
7. Wheels- check for tightness of wheel nuts and axle nuts;
check that axle nuts are secured by cotter pins.
8. Air cleaner element- check for dirt; clean or replace.
9. Steering- check for free operation noting any unusual
looseness in any area.
10. Lubricate the chain and check the tension adjustment.
11. Loose parts- visually inspect vehicle for any damaged
components or loose nuts/ bolts or fasteners.
12. Operator’s helmets, goggles and clothing.
To Next Page
Loading...
Need help?
General
