7. CONTROL AND PARTS FUNCTIONS
Electrical Switches（for T3）
1.Main Switch -This key switch must be turned clockwise to the
“ ” position to start the engine.
2.Engine Start Button-To start the engine.
WARNING
This ATV is not equipped with highway approved lighting. This
ATV is designed for off – road use only and must not be ridden on
streets or highways. Use caution and drive at reduced speeds in
conditions of reduced visibility such as fog, rain and darkness.
NOTE: The taillight is on whenever the main switch (key) is on
the “ ” position. Turn the key off to prevent battery drain.
To Next Page
Loading...
