7. CONTROL AND PARTS FUNCTIONS
Front and Rear Brakes
The front and rear brakes should be checked before each ride.
The front brake lever is located on the right handlebar and the
rear brake lever is located on the left handlebar.
CAUTION
Once a bottle of brake fluid is opened, use what is necessary and
discard the rest. Do not store or use a partial bottle of brake fluid.
Brake fluid is hygroscopic, meaning it rapidly absorbs moisture
from the air. This causes the boiling temperature of the brake fluid
to drop, which can lead to early brake fade and the possibility of
sever injury.
Front Brakes
The front brakes are located on the right handlebar. and are
operated by the right hand. The front brakes are hydraulically
activated disc type brakes.
Always test brake level travel and reservoir fluid level before
riding. When squeezed, the level should feel firm. Any
sponginess would indicate a possible fluid leak or low master
cylinder fluid level which must be corrected before riding. Make
sure the right and left brake are balance after the adjustment of
the front brakes by test at low speed. Contact your dealer for
proper diagnosis and repairs.
WARNING
Use caution when applying the front brake. Do not aggressively
apply the front brake, the front wheels may lock up and the ATV
will loss steering or tip over.
To Next Page
Loading...
Need help?
General
