EasyManuals Logo

Linksys LAPAC1750 User Manual

Linksys LAPAC1750
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Location
Enter the area or location where the access point
resides.
The location includes 1 to 32 characters. Special
characters are allowed.
SNMP v1/v2 Settings
Get Community
Enter the name of Get Community. Get Community is
used to read data from the access point and not for
writing data into the access point.
Get Community includes 1 to 32 characters. Special
characters are allowed.
Set Community
Enter the name of Set Community. Set Community is
used to write data into the access point.
The Set Community includes 1 to 32 characters.
Special characters are allowed.
SNMP v3 Settings
SNMP v3 Settings
Configure the SNMPv3 settings if you want to use
SNMPv3.
Username: Enter the username. It includes 0 to 32
characters. Special characters are allowed.
Authentication Protocol: None or HMAC-MD5.
Authentication Key: 8 to 32 characters. Special
characters are allowed.
Privacy Protocol: None or CBC-DES.
Privacy Key: 8 to 32 characters. Special characters are
allowed.
Access Control
Access Control
When SNMP is enabled, any IP address can connect to
the access point MIB database through SNMP. You can
enable access control to allow specified IP addresses.
Two IPv4 and two IPv6 addresses can be specified.
SNMP Trap
Trap Community
Enter the Trap Community server. It includes 1 to 32
characters. Special characters are allowed.
Trap Destination
Two Trap Community servers are supported: can be
IPv4 or IPv6.
19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LAPAC1750 and is the answer not in the manual?

Linksys LAPAC1750 Specifications

General IconGeneral
Modulation-
Frequency band2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity11 channels
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3at, IEEE 802.3u
Wi-Fi data rate (max)500 Mbit/s
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Quality of Service (QoS) supportYes
InternalNo
PlacementCeiling, Wall
CertificationFCC, CE, IC
Product colorWhite
Cable lock slot typeKensington
Supported network protocolsIPv6
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports1
Security algorithms802.1x RADIUS, WDS, WEP, WPA, WPA2
Number of SSID supported16
Antenna featuresIntegrated antenna
Input current1.5 A
AC input voltage12 V
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth243.08 mm
Width236.98 mm
Height43.69 mm

Related product manuals