Backup/Restore to/from Local PC
Backup
Configuration
Once you have the access point working properly, you
should back up the settings to a file on your computer.
You can later restore the access point's settings from
this file, if necessary.
To create a backup file of the current settings:
•
Choose a source file. It can be Backup
Configuration or Current Configuration.
•
Click Backup.
•
If you don't have your browser set up to save
downloaded files automatically, locate where
you want to save the file, rename it if you like,
and click Save.
Restore
Configuration
To restore settings from a backup file:
1.
Choose a destination file. It can be Backup
Configuration or Current Configuration.
2.
Click Choose File.
3.
Locate and select the previously saved backup
file.
4.
Click Restore.
Backup/Restore to/from TFTP server
Backup
Configuration
To create a backup file of the current settings:
1.
Choose a source file. It can be Backup
Configuration or Current Configuration.
2.
Enter the destination file name you plan to save
in TFTP server.
3.
Enter the IP address for the TFTP server. Only
IPv4 addresses are supported.
4.
Click Backup.
107
To Next Page
Loading...
