Remote Access Login for Users
1.
Select Start > Programs > Administrative Tools> Active Directory Users and Computers.
2.
Double-click on the user who you want to enable.
3.
Select the Dial-in tab, and enable Allow access. Click OK.
802.1x Client Setup on Windows XP
Windows XP ships with a complete 802.1x client implementation. If using Windows 2000, you
can install SP3 (Service Pack 3) to gain the same functionality.
If you don't have either of these systems, you must use the 802.1x client software provided with
your wireless adapter. Refer to your vendor's documentation for setup instructions.
The following instructions assume:
•
You are using Windows XP.
•
You are connecting to a Windows 2000 server for authentication.
•
You already have a login (Username and password) on the Windows 2000 server.
132
To Next Page
Loading...
