Linksys LAPAC2600 - Chapter 1 - Quick Start Guide; Package Contents; Physical Details

Chapter 1 - -- Quick Start Guide
Package Contents
•
Linksys Wireless Access Point
•
Quick Start Guide
•
Ethernet Cable
•
AC Power Adapter
•
CD with Documentation
•
Mounting Bracket
•
Mounting Kit
•
Ceiling Mount Back Plate
•
Drilling Layout Template
Physical Details
LED behavior
LED Color Activity Status
Green
Blinking System is booting.
Solid System is normal; no wireless devices connected.
Blue
Blinking Software upgrade in process.
Solid System is normal; at least one wireless device connected.
Red Solid
Booting process or update failed; hard reset or service
required.
Ports and Button
Power Port—Connect the AC power adapter to this port.
Note—Use only the adapter that came with your access point.
Ethernet Port 1—Use an RJ45 (CAT5e or better) cable to connect the LAPAC2600 to network
devices such as routers, switches and computers. This port supports PoE+ (IEEE 802.3at). You
may use the port to power LAPAC2600 by using PoE+ switch or injector.
4