Linksys LAPAC2600 - Using 802.1 X Mode (Without WPA)

Using 802.1x Mode (without WPA)
This is very similar to using WPA-Enterprise.
The only difference is that on your client, you must NOT enable the setting The key is provided for
me automatically.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the
access point.
Note—On some systems, the 64-bit WEP key is shown as 40-bit and the 128-bit WEP key is
shown as 104-bit. This difference arises because the key input by the user is 24 bits less than
the key size used for encryption.
139