Factory Default
To restore your access point to its factory defaults,
select an option and click Save.
•
Reset Parameters shared with Slaves ONLY
When current AP is a master of a cluster,
select this option to restore all sharable
parameters of current AP and its slaves to
factory defaults. Cluster settings and non-
sharable parameters will not reset.
•
Reset All Parameters to Factory Default
•
No
Don’t restore to factory defaults.
Reboot
Go to Maintenance > Maintenance > Reboot to power cycle the device. The current configuration
file will remain after reboot.
Device Reboot
If you click Save when the Yes radio button is
selected, the device will power cycle.
109
To Next Page
Loading...
