EasyManuals Logo
Home>Linksys>Wireless Access Point>LAPAC2600

Linksys LAPAC2600 User Manual

Linksys LAPAC2600
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
Time
Current Time
Display current date and time of the system.
Manually
Set date and time manually.
Automatically
When enabled (default setting) the access point will get the
current time from a public time server.
Time Zone
Choose the time zone for your location from the drop-down
list. If your location observes daylight saving time, enable
Automatically adjust clock for daylight saving changes.
Start Time
Specify the start time of daylight saving.
End Time
Specify the end time of daylight saving.
Offset
Select the adjusted time of daylight saving.
NTP
NTP Server 1
Enter the primary NTP server. It can be an IPv4 address or a
domain name.
Valid characters include alphanumeric characters, "_", "-"
and ".".Maximum length is 64 characters.
NTP Server 2
Enter the secondary NTP server. It can be an IPv4 address
or a domain name.
Valid characters include alphanumeric characters, "_", "-"
and ".".Maximum length is 64 characters.
15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LAPAC2600 and is the answer not in the manual?

Linksys LAPAC2600 Specifications

General IconGeneral
2.4 GHzYes
Frequency band2.412 - 2.462, 5.18 - 5.24, 5.745 - 5.825 GHz
Channels quantity13 channels
Number of VLAN IDs17
Fit AP mode featuresWireless distribution system (WDS)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3at
Receiver sensitivity802.11b 11Mbps: -85dBm 802.11a/g 54Mbps: -73dBm 802.11n HT20 MCS7: -67dBm 802.11n HT40 MCS7: -65dBm 802.11n HT40 MCS7: -65dBm
Virtual LAN featuresSSID-based VLAN assignment
Wi-Fi data rate (max)1733 Mbit/s
Ethernet LAN data rates1000 Mbit/s
Maximum data transfer rate2533 Mbit/s
Output current2.5 A
Output voltage12 V
Power consumption (max)25 W
InternalNo
PlacementCeiling, Wall
CertificationFCC: 47 CFR FCC Part 15, Subpart B, Class B; 47 CFR FCC Part 15, Subpart C; 47 CFR FCC Part 15, Subpart E CE: EN55022, Class B; EN61000-3-2; EN61000-3-3; 55024; EN 301 489-1 / EN 301 489-17, Class B; EN 300 328; EN 301 893; EN 62311; EN 50385
Product colorWhite
LED indicatorsSystem
Cable lock slot typeKensington
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports2
Antenna featuresIntegrated antenna
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)10 - 85 %
Security algorithms802.1x RADIUS, HTTPS, SNMP, WPA, WPA2
Number of SSID supported16
Service Set Identifier (SSID) featuresHidden SSID
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth243 mm
Width237 mm
Height43.69 mm
Weight848 g

Related product manuals