Linksys LAPN600 - Page 17

13
Username
Enter the Username to login to your SMTP server.
The Username can include up to 32 characters. Special characters
are allowed.
Password
Enter the Password to login to your SMTP server.
The Password can include up to 32 characters. Special characters
are allowed.
Email Address for
Logs
Enter the email address the log messages are to be sent to.
Valid characters include alphanumeric characters, "_", "-", "." and
"@". Maximum length is 64 characters.
Log Queue Length
Enter the length of the queue: up to 500 log messages. The
default is 20 messages. When messages reach the set length the
queue will be sent to the specified email address.
Log Time Threshold
Enter the time threshold (in seconds) used to check if the queue is
full. It’s a value from 1 to 600 and default is 600 seconds.
Syslog
Syslog Notification
Enable Syslog notification.
IP Type
Select the IP type of the syslog server: IPv4 or IPv60029.
Server IP Address
Enter the IPv4 or IPv6 address of syslog server here.