Linksys LAPN600 User Manual

35
Rogue AP Detection
Rogue AP detection is used to detect the unexpected or unauthorized access point installed in a
secure network environment.
Figure 24: Rogue AP Screen
Data - Rogue AP Screen
Wireless Radio
Select the desired radio from the list.
Radio 1 is for 2.4 GHz, and Radio 2 is for 5 GHz.
Rogue AP
Enable or disable Rogue AP Detection on the selected radio.
Detected Rogue AP List
Action
Click Trust to move the AP to the Trusted AP List.
MAC Address
The MAC address of the Rogue AP.
SSID
The SSID of the Rogue AP.
Channel
The channel of the Rogue AP.
Security
The security method of the Rogue AP.
Signal
The signal level of the Rogue AP.
Trusted AP List
Action
Click Untrust to move the AP to the Rogue AP List.

Linksys LAPN600 Specifications

General

Color	white
Wi-Fi Speed	600 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.1 pounds