91
Using 802.1x Mode (without WPA)
This is very similar to using WPA-Enterprise.
The only difference is that on your client, you must NOT enable the setting The key is pro-
vided for me automatically.
Instead, you must enter the WEP key manually, ensuring it matches the WEP key used on the
access point.
Figure 71: Properties Screen
Note:
On some systems, the 64-bit WEP key is shown as 40-bit and the 128-bit WEP key is shown
as 104-bit. This difference arises because the key input by the user is 24 bits less than the key
size used for encryption.
To Next Page
Loading...
