Linksys LAPN600 User Manual

75
802.1x Server Setup (Windows 2000 Server)
This section describes using Microsoft Internet Authentication Server as the RADIUS server,
since it is the most common RADIUS server available that supports the EAP-TLS authentica-
tion method.
The following services on the Windows 2000 Domain Controller (PDC) are also required.
• dhcpd
• dns
• rras
• webserver (IIS)
• RADIUS Server (Internet Authentication Service)
• Certificate Authority
Windows 2000 Domain Controller Setup
1. Run dcpromo.exe from the command prompt.
2. Follow all of the default prompts, ensure that DNS is installed and enabled during installa-
tion.
Services Installation
1. Select the Control Panel -> Add/Remove Programs.
2. Click Add/Remove Windows Components from the left side.
3. Ensure that the following components are selected.
Certificate Services. After enabling this, you will see a warning that the computer cannot be
renamed and joined after installing certificate services. Select Yes to select certificate services
and continue
World Wide Web Server. Select World Wide Web Server on the Internet Information Services
(IIS) component.
From the Networking Services category, select Dynamic Host Configuration Protocol (DHCP),
and Internet Authentication Service (DNS should already be selected and installed).

Linksys LAPN600 Specifications

General

Color	white
Wi-Fi Speed	600 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.1 pounds