EasyManuals Logo

Linksys LAPN600 User Manual

Linksys LAPN600
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
52
Management VLAN
Displays the Management VLAN ID. The VLAN associated with
the IP address you use to connect to the access point. Provide a
number between 1 and 4094 for the Management VLAN ID. The
default is 1.
This VLAN is also the default untagged VLAN. If you already
have a management VLAN configured on your network with a
different VLAN ID, you must change the VLAN ID of the man-
agement VLAN on the access point.
IPv4/v6
IP Address
The IP address of the wireless access point.
Subnet Mask
The Network Mask (Subnet Mask) for the IP address above.
Default Gateway
Enter the gateway for the LAN segment to which the wireless
access point is attached (the same value as the PCs on that LAN
segment).
Primary DNS
The primary DNS address provided by the DHCP server or
configured manually.
Secondary DNS
The secondary DNS address provided by the DHCP server or
configured manually.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys LAPN600 and is the answer not in the manual?

Linksys LAPN600 Specifications

General IconGeneral
Colorwhite
Wi-Fi Speed600 gigabits per second
Frequency Band2.4 ghz
QoS Traffic Prioritizationno
Wireless Standardn
Data Encryptionyes
Encryption Typeother, wep, wpa, wpa2
Security Featuresrogue ap detection; ssid to vlan mapping; 802.1x supplicant
Portsrj-45
Bluetoothno
Weight and Dimensions IconWeight and Dimensions
Height1.72 inches
Width9.33 inches
Net Weight1.1 pounds

Related product manuals