Linksys LAPN600 User Manual

5
Figure 1: Password Dialog
5. From the status screen menu configure for your environment. Details of these screens and
settings are described in the following sections of this chapter.
6. You may also wish to change the admin password on the User Accounts screen, accessed
from the Configuration menu.
7. Wireless stations must now be set to match the wireless access point. See Chapter 4 for
details.
If you can't connect:
It is likely that your PC’s IP address is incompatible with the wireless access
point’s IP address. This can happen if your LAN does not have a DHCP Server.
The default IP address of the wireless access point is 192.168.1.252, with a
network mask of 255.255.255.0.
If your PC’s IP address is not compatible with this, you must change your PC’s IP
address to an unused value in the range 192.168.1.1 ~ 192.168.1.254, with a
network mask of 255.255.255.0. See Appendix A - Windows TCP/IP for details for
this procedure.

Linksys LAPN600 Specifications

General

Color	white
Wi-Fi Speed	600 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.1 pounds