17
Troubleshooting
You can find more help from our award-winning customer support at Linksys.com/support/EA7500.
Your router was not successfully set up
If Linksys Smart Wi-Fi did not complete the setup, you can try the following:
•
Press and hold the Reset button on your router with a paperclip or pin until the LED
starts blinking (about 10 seconds). Install the router again.
•
Temporarily disable your computer’s firewall (see the security software’s instructions
for help). Install the router again.
•
If you have another computer, use that computer to install the router again.
To Next Page
Loading...
