Linksys RE6700 User Manual

Before starting setup, make sure your router has a working
Internet connection.
Does your router have a WPS button?
Wi-Fi Protected Setup (WPS) is a simple way to connect
Wi - Fi devices with Push Button Connect. Routers that
support WPS have a button that might look like one of
these symbols:
Yes
No (or
not sure)
Continue with Wi-Fi
Protected Setup below
Continue
with Browser-based setup,
also in this Quick Start Guide
NOTE- The WPS button will not work if you have disabled WPS on your rout er.
Wi-Fi Protected Setup {WPS)
1
Plug the range extender into an electrical outlet close to
your router.
You can move the range extender to an ideal location later in step 5.
After being plugged in, the indicator LED on the front of your
range extender will
start to blink green for up to a minute.
2 Wait for the indicator LED
on
the front of your range
extender to start to blink
amber before going to
step 3.
This can take up to a minute .
LIN<SYS
RE 0
= ---+r~~+H+--Indicator LED

Linksys RE6700 Specifications

General

Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11g, Wi-Fi 5 (802.11ac), 802.11b, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Networking standards	IEEE 802.11a, IEEE 802.11n, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	1
Ethernet LAN interface type	Gigabit Ethernet
WLAN data transfer rates supported	867 Mbit/s
Product color	White
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %
Quantity per pack	1 pc(s)