Linksys RE6700

3 Extend your 2.4 GHz network.
a. Press the WPS button on your router.
Within the next two minutes complete step 3b.
b. Press the WPS button on the side of your range extender.
The WPS button will light up and the indicator LED on the front
of your range extender will blink green .
WPS Button and LED
Reset
Button
,I
~
\.:,:..
0
-
oD
I!:
I
)
~
_...,
Watch the indicator LED on the front of your range extender to verify
whether the connection was successful.
If it turns
solid green , the connection was successful. Move to step 4.
If it starts to blink amber , the connection failed. You may try again by
repeating
step 3 or try browser-based setup also in this document.