25
Chapter 6: Set Up and Configure the Router
Setup Tab - Password
10/100 4-Port VPN Router
Setup Tab - Password
The Router's default User Name and password is admin, and it is strongly recommended that you change the
Router's password from the default. If you leave the password field blank, all users on your network will be able
to access the Router simply by entering admin into the password field. See Figure 6-10.
Old Password: Enter the old password. The default Password is ‘admin’ when you first power up the Router.
(Note: The password cannot be recovered if it is lost or forgotten. If the password is lost or forgotten, you have to
reset the Router to its factory default settings.)
New Password: Enter a new password for the Router. Your password must be less than 15 characters long and it
can’t contain any spaces.
Confirm New Password: Re-enter the password for confirmation.
Click the Save Settings button to save the Password settings or click the Cancel Changes button to undo the
changes.
Setup Tab - Time
Time
The Router uses the time settings to time stamp log events, to automatically update the Content Filter List, and
for other internal purposes. See Figure 6-11.
Set the local time using Network Time Protocol (NTP) automatically or manually.
Automatic: Select the Time Zone and enter the Daylight Saving and NTP Server. The default Time Zone is Pacific
Time.
Manual: Enter the Hours, Minutes, Seconds, Month, Day and Year.
Click the Save Settings button to save the Time settings or click the Cancel Changes button to undo the
changes.
Figure 6-10: Password
Figure 6-11: Time
To Next Page
Loading...
Need help?
General
