5-23
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Cfwd No Ans Act Code Forwards no-answer calls to the extension specified after the activation code.
Defaults to *92.
Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
Defaults to *93.
CW Act Code Enables call waiting on all calls.
Defaults to *56.
CW Deact Code Disables call waiting on all calls.
Defaults to *57.
CW Per Call Act Code Enables call waiting for the next call.
Defaults to *71.
CW Per Call Deact Code Disables call waiting for the next call.
Defaults to *70.
Block CID Act Code Blocks caller ID on all outbound calls.
Defaults to *67.
Block CID Deact Code Removes caller ID blocking on all outbound calls.
Defaults to *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
Defaults to *81.
Block CID Per Call Deact Code Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block ANC Act Code Blocks all anonymous calls.
Defaults to *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
Defaults to *87.
DND Act Code Enables the do not disturb feature.
Defaults to *78.
DND Deact Code Disables the do not disturb feature.
Defaults to *79.
Secure All Call Act Code Makes all outbound calls secure.
Defaults to *16.
Secure No Call Act Code Makes all outbound calls not secure.
Defaults to *17.
Field Description
To Next Page
Loading...
