EasyManua.ls Logo

Linksys SPA 900 Series - LED Script Examples; LED Pattern

Linksys SPA 900 Series
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-23
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
Line Key LEDs
LED Script Examples
LED Pattern
The administrator can also specify a different color and pattern for each of the following states of the
call appearance.
Idle: This call appearance is not in use. It can be used to make outbound call on this station
Local Seized: This call appearance has been seized by this station to prepare for an outbound call
Local Progressing: This station is making an outbound call that is progressing
Local Active: This station is engaged in a connected call on this call appearance
Local Ringing: This station is ringing for an incoming call on this call appearance
Local Held: This station has placed this call appearance on hold
Remote Seized: This call appearance has been seized by another station to prepare for an outbound
call
Remote Progressing: Another station is making a call on this call appearance and is progressing
Remote Active: Another station is engaged in a connected call on this call appearance
Remote Ringing: Another station is ringing for an incoming call to this call appearance
Remote Held: Another station has placed this call appearance on hold
Remote Undefined: The share call state is not known (this station is waiting for a notification from
the application server)
Registration Failed: This station has failed to register with the proxy server for the corresponding
extension
Registering: The station is attempting registration with the proxy server for the corresponding
extension.
Disabled: This line key on this station is disabled
Call Back: A call back (repeat dialing) operation is currently active on this call appearance
For more information, see “Line Key LED Pattern” section on page 5-31.
Example 1
c=r;p=sb
Color is red and slow blink
Example 2
c=o
LED is off
Example 3
c=g
Color is green and steady on
Example 4
c=a;p=ud;u=.1/.1/.1/.1/.1/.9
Color is amber and blink with the pattern (100ms on, 100ms off, 100ms on, 100ms off,
100ms on, 900ms off).

Table of Contents

Related product manuals